• RTG < 3.5 x 10E7 ohms meets required limit of ANSI/ESD S20.20-2007 Groundable Static Control Garment System tested per ANSI/ESD STM2.1 and ESD TR53
• Creates Faraday Cage effect
  Charges on worker clothing shielded, protecting ESDS devices
• Hip-to-cuff grounding - Click HERE for photo
  Allows your coil cord to snap to the hip of the smock for hands-free grounding, increasing productivity
• Snaps on cuff of smock
  Wristband snaps to inside cuff
• Minimum 9% carbon conductive nylon fibers woven in chain-link design
  Provides continuous and consistent charge dissipation
• Panel to panel conductivity
  Prevents isolated charged conductor in ESD protected area
• Superior 2-year/100 launderings limited warranty – Click HERE for test results
• Click here for smock sizes
• Made in the United States of America
  This item is made and stocked  in Miami, FL 
  
  Estimated Shipining Weight: 0.45 Pounds

Specifications:

• RTT sleeve to sleeve 10E5 – 10E6 ohms, per ANSI/ESD STM2.1
• Cuff connection: 4mm socket snap
• Hip connection: 4mm stud snap
• Design: 3 pockets, collar and sleeve with 3 size adjustment snaps
• Color: Blue
• Fabric: Polyester with minimum 9% carbon fibers
• Charge Decay: < 0.1 seconds per FTMS 101C/4046
• Durability: 100 Minimum Launderings

What the ESD Association says about ESD Garments

Per ESD Handbook TR 20.20 paragraph 5.3.13.3.1.3 Garment Construction “The electrical integrity of the seams is critical and should be verified by electrical continuity measurements between all panels of the garment (ESD STM 2. 1).” To test ESD Smock, see Desco 19780 Surface Resistance Test Kit