19788-SURFACE RESISTANCE METER              

19788 - Surface Resistance Meter

Internet List Price Fax / Email List Price
Qty: 1 $1316.02
Qty: 1 $1447.62

In-stock orders will ship in 3 business days or less after receipt of order.

Stock: 0

Other Quantities - Contact Us.

Stock Location: CHINO, CA

Sold Per: EA

Estimated Shipping Weight: 1.20 lb



Bookmark and Share
  • NEW Enclosure with Rubber Grip Edges
  • Thinner and narrower design is easier to hold and provides protection from drops.
  • NEW Quick Check Button
  • Bypasses the 15 second electrification period to allow quick spot checks.
  • NEW Battery Compartment
  • Easy-to-access compartment without the need for tooling or probes.
  • Digital Compliance Verification Surface Resistance Meter Kit*
  • Measures resistance point-to-point(Rtt) or surface to ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and other documents.
  • Resistance Range: Greater Than 1.0 x 103 ohms to Less Than 1.0 x 1012 (+/-10% Accuracy)
  • Determines if a surface is dissipative, conductive, or insulative for ESD control applications in electronics manufacturing or handling environments.
  • Under Load Test Voltages (10V or 100V ±5%)
  • Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification.
  • Selectable Test Voltage
  • Switches to appropriate test voltage (10V for tests <1 x 106 or 100V for tests >1 x 106) in AUTO mode or may be fixed to at 10V in HOLD mode.
  • Ohm Values are Expressed with a Digital Mantissa and LED Exponent
  • Provides an easy to read and accurate measurement.
  • Pre-set 15 Second Electrification Period in Full Test Mode
  • Meets the requirements of the ANSI/ESD S4.1 testing requirements.
  • Temperature (Fahrenheit and Celsius) and Relative Humidity Measurements
  • Measures temperature and relative humidity (during 15 second electrification period) as required by ANSI/ESD S20.20.
  • NIST Calibrated with Certificate
  • Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Desco products, see Calibration.
  • Made in the United States of America
  • Made and stocked in Chino, CA.

    *19788 Digital Surface Resistance Meter
    1 Digital Surface Resistance Meter
    2 AA Alkaline Batteries
    1 Certificate of Calibration

    Leads and Electrodes may be purchased separately.

    For Digital Surface Resistance Meter Kit see 19787
Show more details...
Hide details...
  • Digital Surface Resistance Meter Kit: Installation, Operation and Maintenance
  • TB-3062 - Digital Surface Resistance Meter Kit: Installation, Operation and Maintenance

Digital Surface Resistance Meter