• Low Charging Transparent Cellulose Film (2.4 Mils Thick) With High-Tack Rubber Adhesive
  Wescorp tape generates less than 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.*
• Marked with ESD Symbols (MIL STD-1285 and ESDA) Between Film and Adhesive
  ESD symbols distinguish ESD version tapes from standard, non-ESD tapes.
• Surface Resistance 1 x 10⁸ to < 1 x 10¹¹ ohms
  Tested per ANSI/ESD S11.11 to meet dissipative limits of packaging standard ANSI/ESD S541.
• Temperature Range 10°C - 71°C (14°F - 160°F)
  
• Lead-Free RoHS Compliant 
  
  

*All tapes will generate some amount of triboelectric charge when unwound from roll.  Standard, non-ESD tapes typically generate more than 1000 volts when unwound from roll.  If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape. 

Groundable Tape Dispenser