• Static Dissipative Zinc Free Floor Finish
  Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
• Dissipative (1 x 10⁶ to < 1 x 10¹⁰ ohms) Coating - ANSI/ESD S7.1 and ESD TR53
  Meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method
• Low Tribocharging (<100 volts) Coating - ANSI/STM 97.2
  Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring
• Low-VOC
  Meets CARB and other regional VOC requirements
• 23% Solids- 2 Coat System**
  Reduces labor needed for initial install and on-going maintenance of the floor
• Better Hardness vs. Leading Competition – ASTM Standard D2134.93
  Resists wear in order to maintain ESD performance longer
• UL Listed for Slip Resistance
  Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user’s liability exposure
• Bag-In-Box Packaging
• Lead-free RoHS Compliant
• Trouble shoot common floor care problems. Click HERE.
• Made In the United States of America
  This item is made and stocked in Canton, MA.
  
  

*Statguard® Low-VOC does not contain harmful chemicals:

• NO APE (alkylphenol ethoxylates) surfactants
• NO Carcinogens, Mutagens, or Reproductive Toxins
• NO Ozone-depleting compounds
• NO Ammonia
• NO Heavy metals (Zinc Free)
• NO Flammable components
• NO Components toxic to aquatic life

**Some extra high traffic areas may require an initial 3 coat application.