• Stretch Fit Heel Grounder
  Converts non-ESD footwear to footwear that will provide a path-to-ground and will not generate a charge.*
• Tab to Cup Resistance: 1 x 10⁶ to < 1 x 10⁷ ohms at 100 volts
  Meets the ANSI/ESD S20.20 required limit tested per ESD SP9.2 & ESD TR53 as suitable ESD footwear component in personnel grounding flooring/footwear system.
• 1" Wide Elastic Back Strap (2 Sizes- Regular and Large) 
  Stretches to fit larger shoes such as running shoes or work boots.
• Snap-Loc Fastening System
  Adjusts to operator shoe size and flexes during normal walking motion.
• Tear Resistant rubber Material with Reinforced Inner Scrim
  Prevents tearing - increasing the service life of foot grounder
• Non-Marring Interior Material
  Will not leave marks on operator’s shoes.
• 30 Inch Conductive 8-Strand Nylon Polyester Grounding Tab
  Additional conductive material provides reliable connection with operator’s sweat-layer.
• UL Listed
  Independently reviewed for adequacy of the product’s design.
• Made In the United States of America
  This item is made in Rochester, NH and stocked in Canton, MA

*Foot grounders must be used with an ESD floor (<1 x 10⁹ ohms) to create a path-to-ground and minimize charge generation.