• Groundable Static Control Garment System Tested Per ANSI/ESD S20.20-2014 (Rtg < 3.5 X 10⁷ ohms) Requirements, per ANSI/ESD STM2.1 
• Allows operators and smock to be bonded or electrically connected to ground to prevent ESD events in ESD Protected Areas.
• Creates Faraday Cage effect                   
  Charges on worker clothing shielded, protecting ESDS devices
• Hip-To-Cuff Grounding
  Grounds operator with no need for a cord to be attached to the operator's wrist.
• Snaps on cuff of smock
  Wristband snaps to inside cuff
• Minimum 9% carbon conductive nylon fibers woven in chain-link design
  Provides continuous and consistent charge dissipation
• Panel to panel conductivity
  Prevents isolated charged conductor in ESD protected area
• Pant pocket slits
  Easy access to pocket
• Superior 2-year/100 launderings limited warranty – Click HERE for test results
• Click here for smock sizes
• Made in the United States of America
  This item is made in Miami, FL and stocked in Canton, MA.
   
   Specifications:

• RTT sleeve to sleeve 10E5 – 10E6 ohms, per ANSI/ESD STM2.1
• Cuff connection: 4mm socket snap
• Hip connection: 4mm stud snap
• Design: 3 pockets, collar and sleeve with 3 size adjustment snaps
• Color: Blue
• Fabric: Polyester with minimum 9% carbon fibers
• Charge Decay: < 0.1 seconds per FTMS 101C/4046
• Durability: 100 Minimum Launderings

This item available now on eBay!


What the ESD Association says about ESD Garments

Per ESD Handbook TR 20.20 paragraph 5.3.13.3.1.3 Garment Construction “The electrical integrity of the seams is critical and should be verified by electrical continuity measurements between all panels of the garment (ESD STM 2. 1).” To test ESD Smock, see Desco 19780 Surface Resistance Test Kit 

Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. Desco to approve exchange for similar items.